Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HERAFLEX E 6521 1000 NT - TPC - RadiciGroup High Performance Polymers

Material Data Center offers the following functions for HERAFLEX E 6521 1000 NT:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Heraflex E datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
TPC-ET Thermoplastic Elastomer. Medium-high Modulus, Nominal Shore D/15s 57. Natural colou
机械性能价值单位Test Standard
ISO数据
拉伸模量 390 MPa ISO 527
屈服应力 25 MPa ISO 527
屈服伸长率 25 % ISO 527
名义断裂伸长率 >50 % ISO 527
简支梁缺口冲击强度, +23°C 70 kJ/m² ISO 179/1eA
10%应变时的应力 19 MPa ISO 527
100%应变时的应力 22 MPa ISO 527
300%应变时的应力 23 MPa ISO 527
撕裂强度 241 kN/m ISO 34-1
耐磨性 20 mm³ ISO 4649
肖氏硬度D 57 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 212 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 60 °C ISO 75-1/-2
热变形温度, 0.45 MPa 110 °C ISO 75-1/-2
维卡软化温度, B 195 °C ISO 306
电性能价值单位Test Standard
ISO数据
体积电阻率 1E13 Ohm*m IEC 62631-3-1
其它性能价值单位Test Standard
吸水性 0.2 % 类似ISO 62
密度 1230 kg/m³ ISO 1183
典型数据
加工方法
注塑, 异型材挤出成型
供货形式
碎粒料, 自然色
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型
该材料用防水包装运输，已经为后续加工准备好。最合适的加工含水量最大值推荐为0.05%。除湿干燥机的典型条件：温度110°C，露点-30°C或更低，时间2-4h或更多。注意避免材料吸水以及添加再粉碎材料时混入其他聚合物的污染。颜色变化及机械性能下降可能会发生，需要仔细监控

注塑, 加工参数
熔融温度模具温度注塑速
230 - 240°C 30 - 50°C中
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.